Archive for the ‘Windows 8’ category

Reset Windows 8 or 7 Password with the Freeware NTPasswd

July 3rd, 2015 by Admin

“My laptop was installed with Windows 7 with only one account, but no reset disk was created. Now I had forgotten my administrator password and don’t know how to reset it.

Had tried Ophcrack to burn its ISO into a flash drive, but failed to recover my password. Is there any way to reset my password without formatting my whole system disk?”

Fortunately, if you have lost your Windows password, there are several approaches you can take for either recovering or resetting the forgotten password. In this tutorial we’ll show you how to reset Windows 8 or 7 password with the freeware NTPasswd (Offline NT Password & Registry Eidtor). NTPasswd is a small Linux tool that allows you to reset Windows admin/user password on a computer where you forgot your password.

How to Reset Windows 8 or 7 Password with NTPasswd?

First go to the official website of NTPasswd and grab a copy of the bootable CD image. To install NTPasswd onto a blank CD, Right-click on the ISO file and then click “Burn disc image” option. If your system doesn’t have built-in support for burning, you can take use of the free burning tool ISO2Disc.
When the bootable NTPasswd CD is ready, it’s time to reset your lost Windows password. Insert the CD into the optical drive and restart the target computer. You might have to adjust the BIOS to allow booting from the CD.
After booting to the NTPasswd tool, you have to select which partition that has Windows installed. In most cases, there will be only one partition so you can just hit Enter to use the default value.
Next, select which part of registry to load, press Enter to leave it as default option which is “Password reset [sam]”.
When you see the chntpw Main Interactive Menu, press Enter to select “Edit user data and passwords” option.
Choose the user account where you want to reset the password. You can find the RID, which you have to enter now, to the left of the username.
On User Edit Menu, type 1 and press Enter to select “Clear (blank) user password”.
If there is nothing wrong, you should see a message Password cleared!. Then, type q and press Enter to quit editing the user.
Next type q to quit the NTPasswd tool and type y to save your password reset changes. Press Ctrl + Alt + Del to restart your computer. You should be able to login to Windows without any problems — remember to change the password to something complex that you can still recall easily.

Note that NTPasswd could be used to reset password for local account only. If you need to bypass Windows 8 Microsoft account, or reset domain user password, you might need to take use of the commercial software PCUnlocker.

Comments Off on Reset Windows 8 or 7 Password with the Freeware NTPasswd »

Posted in Free Software, Tips & Tricks, Windows 7, Windows 8

Tags: free windows password reset NT password reset NTPasswd NTPassword Offline NT Password & Registry Eidtor reset windows password with ntpasswd Windows NT password reset

2 Methods to Fix “The Group Policy Client service failed the logon. Access denied.”

July 1st, 2015 by Admin

When you try to log on to your Windows account, you might encounter the error “The group Policy Client service failed the logon. Access is denied.”

When you click OK, the system will return you back to the login screen. Searching this on the net gave a lot of answers but none of them seemed to solve it. In the end we discovered that it is a permissions problem and not a corrupt profile problem. Here’s two methods to fix this issue.

Before getting started, you need to log on to your computer with a working administrator account. Then follow the solutions below to fix the problem for your affected account.

Method 1: Regain Registry Permissions

Press the Windows key + R to bring up the Run box. Type regedit and hit Enter.
When the Registry Editor opens, select HKEY_USERS in the left pane. Now, pull down the File menu and choose the Load Hive option.
When the Load Hive dialog appears, select All Files in the Files of type box. Navigate to your affected profile folder (for example, C:\Users\<user_name>) and select the NTUSER.DAT hive. Click Open.

Note: if the NTUSER.DAT file doesn’t show up, you might need to configure Windows to display the hidden files.
It will ask you for a name. Give it any name, it doesn’t matter what it is.
You will now see the hive you just loaded with the name you gave it under the HKEY_USERS key. In my example, the entire NTUSER.DAT hive has been loaded into the Registry Editor under the registry location: HKEY_USERS\NTUSER.
Right-click on HKEY_USERS\NTUSER and select Permissions.
Here you should see at least three accounts: System, Administrators and the name of your affected user account who’s profile you are fixing. If ANY of these are not shown it will not work. You need to add all three and then give them full control in the Permissions section.
Once you have added all three and given them the correct permissions, click the File menu and select Unload Hive. Close the Registry Editor.
Log off or restart your computer. You should be able to login successfully with your account that you were having trouble with.

Method 2: Deleting the Local Profile

This method works by deleting your affected local profile, so you can then log back on. After successfully logging on, Windows will automatically create a new profile for your account. Here’s how to delete the profile for your affected Windows account in Windows 10, 8, 7 and Vista:

Right-click on My Computer icon on your desktop, and then select Properties.
From there, click the Advanced System Settings link on the left-hand side.
When you see the System Properties dialog, click the Settings button in the User Profiles section.
In the User Profiles dialog box, select the profile of your affected user account and click on Delete.
Click OK to confirm. Now you’ve successfully deleted a user profile. Your problem should be fixed by now.

Comments Off on 2 Methods to Fix “The Group Policy Client service failed the logon. Access denied.” »

Posted in Others, Tips & Tricks, Windows 10, Windows 7, Windows 8, Windows Vista

Tags: delete windows user profile the group Policy Client service failed the logon

How to Show Hidden Files in Windows 11, 10, 8, 7 and Vista

July 1st, 2015 by Admin

One accidental deletion of a single system file can render your computer unusable. By default, Windows hides certain system files from view in Windows Explorer. This protects important files from being accidentally deleted, modified or altered.

But there are times when it’s necessary to view the hidden files and folders when coming to troubleshoot Windows problems. Here’s how to show hidden files in Windows 11, 10, 8, 7 and Vista.

How to Show Hidden Files in Windows 11, 10, 8, 7 and Vista?

Open up a Windows Explorer window, choose Organize -> Folder and search options.

In Windows 10 or 8, click on the View tab at the top of Windows Explorer, and then click Options.

In Windows 11, open File Explorer and click on the See more button (three dots) on the right side of the toolbar, and then select Options.
From the opened Folder Options box, go to View tab.
Under the Advanced settings section, click to select “Show hidden files, folders, and drives” radio button. If you are trying to get into the Windows directories, you might want to also remove the checkbox from “Hide protected operating system files (Recommended)” as well.
When you are done, just click Apply and OK, and your changes will take effect immediately.

Comments Off on How to Show Hidden Files in Windows 11, 10, 8, 7 and Vista »

Posted in Others, Tips & Tricks, Windows 10, Windows 7, Windows 8, Windows Vista

Tags: how to view hidden files in windows show hidden files show hidden files in windows

Rate My Computer with Built-in Performance Testing Tool in Windows 8 or 7

June 28th, 2015 by Admin

Running benchmarks on a computer enables users to evaluate performance, to identify potential bottlenecks, and to choose effective system upgrades. Like Windows Vista, Windows 8 and 7 also come with a performance assessment tool, which rates your system and then gives you tips on improving it.

The following tutorial will walk you through the procedure to rate your computer with the built-in Performance Information Tools in Windows 8 or 7.

How to Rate Computer Performance in Windows 8 or 7?

First of all, open up the Control Panel. In Windows 8, you can simply press the Windows key + X to bring up the Power User menu and then select “Control Panel”.
Under System and Security, click Review your computer’s status.
In the left pane, click on View Performance Information.
When the Performance Information and Tools window appears, click on Rate This Computer to run the benchmark.

If you have ever run an assessment for this computer before, click the Re-run the Assessment link to recalculate your performance rating.
The assessment may take a few minutes to complete depending on your system’s hardware and software configuration.
After the test is complete, Windows will give scores for your computer’s processor, memory, graphics, gaming graphics, and hard disk.

Though it’s not known as an especially accurate measure of PC performance, particularly when comparing scores with other systems, it can be a useful tool to identify a hardware deficiency.

Comments Off on Rate My Computer with Built-in Performance Testing Tool in Windows 8 or 7 »

Posted in Tips & Tricks, Windows 7, Windows 8

Tags: rate computer performance rate my computer rate this computer rate this computer in windows 7 rate this computer in windows 8

How to Enable or Disable Windows 10 Upgrade Notification

June 25th, 2015 by Admin

The final version of Windows 10 will release to public on July 29, 2015, and all Windows 7 and Windows 8 users can upgrade to Windows 10 for free in the first year of launch. To make the upgrade process easier, Microsoft has released a new update KB3035583 that will install a Windows 10 upgrade notification tool called “Get Windows 10”.

windows-10-upgrade-notification

If you click on the small Windows icon at the right end of the system tray, it will launch the “Get Windows 10” app and you will be able to reserve your free copy of Windows 10. However, for some reason this icon isn’t appearing on all systems, or you might want to remove the annoying upgrade notification. In this tutorial we’ll explain how to enable or disable the Windows 10 upgrade notification.

Part 1: Enable the Windows 10 Upgrade Notification

If the “Get Windows 10″ upgrade app icon is missing in taskbar, how can you get it to appear in Windows 7 or 8? The “Get Windows 10” app is delivered through an optional update and you need to have patch KB3035583 installed.

The first thing to try is make sure Windows Update is set to automatically install all updates on your PC and that your system is fully up to date. That alone might be enough to get the Windows 10 upgrade notification icon to appear.

Part 2: Remove the Windows 10 Upgrade Notification

But there are also many people who want to stick to Windows 7 or Windows 8.1, the “Get Windows 10” app and its icon present in taskbar notification area might become annoying. To remove the upgrade notification completely, you have to uninstall the update KB3035583:

Open the Command Prompt with Administrator privileges. In Windows 7, right-click on the Command Prompt icon and select Run as administrator. In Windows 8, simply press the Windows + X key to bring up the Power User menu and then select “Command Prompt(Admin)”.
Type the following command in the Command Prompt and hit Enter.
WUSA /UNINSTALL /KB:3035583
Follow the on-screen prompts, and when complete type exit to close Command Prompt. Restart your computer and the Windows 10 upgrade notification will go away permanently.

If you want to avoid Windows installing this update again, you will need to block the patch by opening Control Panel –> Windows Updates and checking for updates, then right-click the update KB3035583 and choose to hide it.

Comments Off on How to Enable or Disable Windows 10 Upgrade Notification »

Posted in Tips & Tricks, Windows 10, Windows 7, Windows 8

Tags: disable windows 10 upgrade notification remove get windows 10 app remove windows 10 upgrade notification turn off windows 10 upgrade notification windows 10 upgrade notification windows 10 upgrade notification missing

FAQs for Password Reset Disk in Windows

June 22nd, 2015 by Admin

A password reset disk allows you to change lost Windows user password from Windows login screen, without needing to know your old password. In one of my previous posts we’ve covered how to create and use a password reset disk in Windows 7. Here we’ll try to answer the frequently asked questions about password reset disk in Windows 10/8/7/Vista/XP.

The use of password reset disk has actually protected many users against forgetting their logon passwords. And Microsoft recommends you to always create a password reset disk immediately after setting up a new user account. If you have a lot of users and do not wish to create a reset disk for each one, then you should at least create one for the administrator account on that computer. You can then use that administrator account to change any other user’s password.

FAQ: I’ve created a password reset disk for account A, can I use it to reset the password for account B?

No. Password reset disk is unique to an account (good from security point of view). That’s to say, even if you create a password reset disk for account A of Windows machine A, you cannot use it to reset the password for account B of Windows machine A, and you’ll got the following error message:

password-reset-error

FAQ: Can I create a password reset disk after forgetting my Windows password?

It’s too late to create a password reset disk. You have to create a password reset disk before you forgot the password. If you’ve already forgotten your Windows password and don’t have a password reset disk, you need to take use of the third-party live CDs such as PCUnlocker.

FAQ: Do I have to re-create a password reset disk after changing the password?

Your previously-created password reset disk will continue to work. No need to re-create the disk every time you change your user password.

FAQ: Can I create multiple password reset disks for one account?

Only one password reset disk can be created for per account. When you try to create another password reset disk, you’ll get the warn message “There is already a password reset disk for this user account. Creating a new one will make the old one unusable. Do you want to continue?”

replace-reset-disk

If you click Yes, the previous password reset disk automatically expires, and Windows no longer recognizes it when the user tries to use it to reset the password. This is integrated in the operating system for security purposes.

FAQ: Why Windows say “this disk is not a password reset disk”?

A password reset disk is actually a USB drive that contains a single file named userkey.psw in its root directory. userkey.psw is an encrypted backup version of your password.

password-reset-disk

If you try to reset password using a USB drive that doesn’t contain the userkey.psw file, Windows will warn you that it’s not a password reset disk.

not-password-reset-disk

FAQ: Where should I store the password reset disk?

A password reset disk in the wrong hands could be used to reset the account password for whichever computer and user account for which it was created. Therefore it’s imperative to keep your password reset disk in a secure location, preferably away from the computer it was created with.

Comments Off on FAQs for Password Reset Disk in Windows »

Posted in Windows 10, Windows 7, Windows 8, Windows Vista, Windows XP

Tags: password reset disk this disk is not a password reset disk windows password reset disk

How to Install Windows 10 or 8.1 with Local Account (Skip Microsoft Account)

May 30th, 2015 by Admin

Can I install Windows 10 with a local account as now a Microsoft account is required? When installing Windows 10 or 8.1, you will not see an option to create a local account by default, and instead you have to log in to your Microsoft Account or be asked to create a new one. Here’s a workaround to skip the Microsoft account sign-in so you can install Windows 10/8.1 with a local account.

How to Install Windows 10 or 8.1 with Local Account?

Start the installation of Windows 10/8.1 as you would usually do, and follow on-screen instruction to proceed.
When you’re prompted to sign in to your Microsoft account, click on “Create a new account“.
On the screen where you’re required to enter information to create a Microsoft account, scroll down to the bottom, and click on “Sign in without a Microsoft account“.
Enter your desired user name, password and password hint for the local account to be used to login to Windows. Click on Finish to continue the installation as usual.

Comments Off on How to Install Windows 10 or 8.1 with Local Account (Skip Microsoft Account) »

Posted in Tips & Tricks, Windows 10, Windows 8

Tags: install windows 10 with local account install windows 10 without microsoft account install windows 8 without microsoft account install windows 8.1 with local account

How to Enable BitLocker Encryption without TPM Chip

May 17th, 2015 by Admin

BitLocker is a useful hard drive encryption feature in Ultimate and Enterprise versions of Windows 10/8/7/Vista, which allows you to encrypt an entire fixed drive. If you try to enable BitLocker on an old computer without TPM chip, you will receive one of the following error messages:

“A compatible Trusted Platform Module (TPM) Security Device must be present on this computer, but a TPM was not found. Please contact your system administrator to enable BitLocker.”

“This device can’t use a Trusted Platform Module. Your administrator must set the “Allow BitLocker without a compatible TPM” option in the “Require additional authentication at startup” policy for OS volumes.”

However, not all computers include TPM and you can’t add a TPM chip to a computer. Luckily there is a group policy that allows you to configure BitLocker to work without a TPM chip. Here’s how:

Press the Windows key + R to bring up the Run box, type gpedit.msc and hit Enter to open the Group Policy Editor.
Go to Local Computer Policy > Computer Configuration > Administrative Templates > Windows Components > BitLocker Drive Encryption > Operating Systems. Double-click on “Require additional authentication at startup“.
In the radio buttons at the top, select Enabled. Check the box marked “Allow BitLocker without a compatible TPM“.
Click OK and close out of Local Group Policy Editor.
Now we will need to force the policy to take effect on your PC, to do this press the Windows + R key combination. When the Run box opens, type gpupdate /force and hit Enter.

Now you can use BitLocker to encrypt your system drive without having a TPM chip in your computer.

Comments Off on How to Enable BitLocker Encryption without TPM Chip »

Posted in Tips & Tricks, Windows 10, Windows 7, Windows 8, Windows Vista

Tags: bitlocker tpm not found bitlocker without tpm enable bitlocker without tpm use bitlocker without tpm

Parallels Desktop: Reset Lost Windows VM Password

May 16th, 2015 by Admin

If we forget the Admin password for a Windows virtual machine running on Parallels Desktop, is there an easy way to reset it? With PCUnlocker you can reset lost Windows password and regain access to your Parallels VM. This is considerably faster than destroying and rebuilding your VM.

This tutorial will take you step by step through resetting a Windows login password inside a Parallels Desktop virtual machine running on your Mac.

How to Reset Windows VM Password on Parallels Desktop?

Click here to download and save the PCUnlocker self-extracting Zip file on to your Mac. Once the download is complete, double-click on the .zip file and Archive Utility should appear and automatically extract your files. Open the folder you extracted to and you can see a CD image: pcunlocker.iso.
Start Parallels Desktop but do not start your virtual machine. Right-click on your Windows virtual machine and choose Configure.
In the Virtual Machine Configuration dialog, choose the Hardware tab and select CD/DVD 1. Make sure that Connected option is checked. From the “Connected to:” drop-down list, select “Choose an image file” and locate the pcunlocker.iso file you downloaded in step 1.
Go to Hardware tab and click Boot Order. Move CD/DVD to the first place in the Boot order.
Start your Windows virtual machine and it will boot directly to the PCUnlocker program which lists all user accounts on your Windows system.
Select a user whose password you would like to reset and click on “Reset Password” button to clear the user’s password. The program should now alert you that the password was cleared.
You can now power off your virtual machine. Be sure to go back to the Virtual Machine Configuration and change the boot order back to hard disk. Start the VM and you should be able to log into Windows without typing a password!

Besides resetting Parallels Desktop password, you can also use PCUnlocker to bypass the passwords for Windows virtual machines running in Parallels Workstation, VMware Workstation, VirtualBox, Hyper-V, Virtual PC, ESX/ESXi, and other virtualization software.

Comments Off on Parallels Desktop: Reset Lost Windows VM Password »

Posted in Tips & Tricks, Windows 10, Windows 7, Windows 8, Windows Vista, Windows XP

Tags: parallels desktop password reset parallels password reset parallels windows password reset parallels vm password

Extend Windows 10/8/7/Vista Trial Period from 30 to 120 Days

May 14th, 2015 by Admin

During Windows installation, you can skip the product key screen to continue installing the OS for evaluation purpose. By default, you can use it for 30-day trial period. If your trial has run out before you’ve decided whether or not to purchase a license key, you can extend the trial period from 30 days to 120 days.

In this article we’ll show you how to renew the trial period once it has expired with just a simple command. This method works regardless of what edition of Windows you’re running, including Windows 10, 8, 7, Vista and Windows Server 2012, 2008.

How to Extend Windows 10/8/7/Vista Trial Period from 30 to 120 Days?

Open up a Command Prompt in Administrator mode.
Type slmgr.vbs –rearm at the Command Prompt, and press Enter. In Windows 10 or 8.1, use slmgr.vbs /rearm instead.
After a couple of seconds it will show you the message window that the command has completed successfully.
Restart your computer and you can use the trial version for another 90 days for free. If you want to enjoy exact 120 days, run above mentioned command on the last day when your Windows trial period is going to expire.
You can check how many days are left in your trial period, by running slmgr.vbs -dli in the Command Prompt.

Comments Off on Extend Windows 10/8/7/Vista Trial Period from 30 to 120 Days »

Posted in Tips & Tricks, Windows 10, Windows 7, Windows 8

Tags: extend windows trial period reset windows trial period windows trial reset